Don't think that wallpaper is going
to cover defects in a wall. As a matter of fact, wallpaper
will cling to every bump, every ding and every crack, exposing it
for all to see. When thinking of hanging Windows are some of the
most used parts of any house, and to keep them looking nice and
working smoothly, a good paint job can make a big difference. We
all know we've been to houses, new or old, whose windows have been
painted shut because of sloppy work. Sometimes, locks are painted
over, rendering them inoperable, or too much paint has made it difficult
to slide a window up or down.
If you're going to paint a window
frame, take the time to do it right the first time, and prevent
the problems that arise from shoddy workmanship. Before you even
open that can of paint or arm yourself with that paintbrush, do
these steps:
1)Sand the existing window frame!
Most people don't realize that sanding prior to painting will not
only enable the paint to adhere better, but will ensure a smooth,
glossy finish that will give your windows a professional, classy
look. Sanding is especially necessary on windows that have
been painted shut. In many cases, you can take a sash saw, or even
a utility blade or hacksaw blade, slide it beneath the window and
loosen old paint.
2)Take a few moments to caulk cracks
or holes in the sash area or window frame. You can paint over wood
putty, but don't forget to sand it down first, using fine-grit sandpaper.
3)Apply painter's tape around the
window to prevent your window trim paint from getting onto your
walls, unless it's the same color. Blue masking tape works
well and is highly visible, so stay inside the lines, just like
you used to do when coloring. Blue masking tape is easier to remove
than regular masking tape, and won't damage walls or other surfaces.
4)Using a 1-2 inch brush, primer wood
surfaces prior to applying paint.
5)Apply one to two coats of paint,
allowing ample drying time in between. Use long strokes to ensure
a smooth finish. Don't switch directions and paint vertically, and
then horizontally. Vertical strokes on vertical pieces, horizontal
strokes on horizontal pieces are the general rule.
6)Remove masking tape.
7)If paint has gotten on windows,
use a straight edge razor blade to scrape paint, being careful not
to scratch the glass.
Taking the time to prepare your windows
prior to painting means the difference between a working
window and a stuck window. Do it right the first time.
