Ceiling Fan Installation | Installing a Ceiling Fan

Ceiling Fan InstallationCeiling Fan Installation

Ceiling fans in your home can be a real energy saver with an added bonus of more comfort for everyone at little cost for the electrical power that operates the fan units. Fans are less expensive to buy now than several years ago, making the total package a bargain from store, to ceiling, to air circulation. Ceiling fan installation is not incredibly difficult. Read on to find out how.

Ceiling fans help lower both air conditioning and heating costs. In air-conditioned rooms, the cool air tends to pool on the floor surface. With the paddles of a slow turning ceiling fan stirring the air, cool air is distributed throughout the room. In heating situations, rooms may be comfortable at a floor level, but uncomfortably warm near the ceiling: a sleeping loft; and upper berth of a bunk bed; or a room with a cathedral ceiling are good examples. The fan corrects this by circulating the rising warm air throughout the room. It costs just pennies to distribute the costly-produced heat. A ceiling fan working during the summer season to cool can provide plenty of comfort for a fraction of the cost of running a window or central air conditioning unit.

Ceiling Fan Installation – The Right Size

THE RIGHT BLADE SPAN:Critical in choosing a ceiling fan is the correct blade span. The span is the distance from the tip of one blade to the tip of another opposite blade.

Thirty-six inch fans are the rooms up to 9×12 feet. Examples are kitchens, bathrooms, large closets.

Forty-two inch fans are designed for rooms up to 12×15 feet. Examples are kid’s bedrooms, large kitchens, family rooms, studies.

Fifty-two inch fans are for rooms larger than 12×15 feet. Living rooms, dining rooms, large porches, master bedrooms, recreation rooms, large family rooms are examples.

The number of fan blades can be important in your ceiling fan selection. Most fans have four blades. Others have five or six blades. The additional blades permit a smaller fan to produce similar air movement of a larger fan. For example, a smaller fan with more than four blades is about equal to a larger fan with four blades.

Ceiling Fan Installation – Configuration

DIFFERENT CONFIGURATIONS:There are three different basic installation configurations you should consider: downrod style, next-to-the-ceiling style, and “duomount” style.

Downrod-This is the traditional style. The design incorporates an 8-inch downrod from the ceiling to the top of the fan motor. The design is tailored to rooms with high ceilings-those over 8-feet-or rooms where the fan will be installed over furniture. It is an excellent choice for cathedral ceilings. Downrod units generally have a self-aligning ball hanging canopy. This device lets you install the fans on ceilings with up to a 45-degree slope or pitch.

Next-to-ceiling-For ceilings 8 feet or less, this style is a wise choice. Installation permits maximum clearance in rooms which have high traffic. There are two configurations in this style:

Adapter configuration-This utilizes a traditional fan design. It has a bottom plate, side band, and top plate. Instead of a downrod, the adapter provides additional clearance from the bottom of the fan to the floor.

Cannister configuration- It has the same clearance as the adapter. Its design combines traditional and modern styling in a unique look.

Duo-Mount style- It permits a traditional downrod installation or a next-to-ceiling installation.

Ceiling Fan Installation – Specs
BACKGROUND INFORMATION:The blades of ceiling fans must be at least 7 feet from the floor. There should be at least 12 inches of clearance between the top of the blades and the ceiling surface of the room in which the fan is installed. The blades should also be free to rotate: no obstructions in the rotation path. If you are doubtful about blade clearance, be sure to check the length of the fan blades at the store.

Ceiling fans operate on regular housepower. You can connect the fans directly to the wires in a ceiling outlet box, for example. No electric transformers or special switching devices are needed. Or, you can run a power wire to the outlet box. Buy No. 12/2 wire with ground for this installation. You can tap into an existing power wire in the attic or crawl space. Or, you can fish a wire to a wall outlet and tap into power at this point. A third alternative is to run a wire from the main electrical entrance panel. However, you should have a professional make this connection-and the other connections, if you don’t have the know-how.

CAUTION:Before working with electrical wires, turn off the power to the circuit on which you will be working at the main electrical service entrance. Do not flip a switch in the room and expect the power to be off. Go to the source panel.

Ceiling Fan Installation – Installation
Installation Data:Hanging brackets can vary slightly by fan design and the manufacturer of the fan. Most brackets have a ball and socket of J-hook suspension. The ball-and-socket keeps the fan in a level mode while it is running -and not running and the device also helps prevent vibration and noise created by the rotation of the fan blades at various speeds.

Some manufacturers suspend their fans with a J-hook device. The fan just hooks over a bracket connected to a ceiling joist or other similar framing in the ceiling.

To install any ceiling fan to an existing outlet in the ceiling, remove the ceiling light first. In order: remove the cap nut holding the decorative covering or escutcheon over the electrical ceiling box; then unscrew the lock nut, strap or hanger bracket, and the stud or nipple assembly that connects to the center of the box; after you turn off the power at the main service entrance, disconnect the power wires from the light socket assembly. If there is just an escutcheon or decorative plate hiding the ceiling box, simply remove the nut holding the escutcheon to the box.

If there is no light or escutcheon, there may still be an electrical box hidden by plaster or gypsum board joint cement. If you get at an angle to the light on the ceiling, you may be able to detect a slight texture difference in ceiling material, and that’s where the box will be located. Peel back the ceiling covering material with a cold chisel and hammer to reveal the ceiling box or electrical connection at this point.

Ceiling Fan Installation – Bracket
SWIVEL BRACKET-The bracket usually is attached to the framing member that supports the electrical box. This member can be a joist, rafter, or “cripple” that has been nailed into position to support the electrical box.

Do not attach the bracket to the electrical box make sure the bracket is fastened to a framing member that is securely fastened. This framing must support the weight of the fan as well as the torque produced by the rotation of the fan blades.

Ceiling Fan Installation – J Hooks
J HOOKS- If the fan will be mounted on J-hooks the device is also fastened to a framing member such as a ceiling joist. It goes through a knockout in the bottom of the electrical box directly into the framing member. Do not fasten the j hook to the electrical box.

Ceiling Fan Installation – Beams
ON EXPOSED BEAMS-If the fan will be mounted on an exposed beam ceiling, such as in a room with cathedral ceiling, position the fan between the beams, using a 2×4 or 2×6-inch length of wood between the beams to hang the fan. You can use a fan with a ball-and-socket type (swivel) hanging device. Or, you can buy a “Hang-Fast” bracket (or similar bracket) for the installation. There usually must be 6 ins. of space for the bracket. Brackets also may be used where attic crawl space is not available for mounting and hooking up the ceiling fan.

The blocking between exposed beams can be spiked to the beams with 16d or 20d nails. If 16d, use finishing nails, countersink the nailheads, and fill the holes with a matching wood filler.

Then install a ceiling electrical box to the wood blocking. Knock out the round plug in the bottom or side of the box to accept the power wire and the box connection. The knockout is also for the hanger, which is fastened to the blocking through the knockout. Do not fasten the hanger to the ceiling box. The ceiling box hanger will be covered by the coiling escutcheon usually provided in the fan kit.

Ceiling Fan Installation – Ceilings
ON FINISHED CEILINGS-If the fan will be installed on a finished ceiling that has no outlet/wiring, find a joist or rafter behind the ceiling covering and cut a hole through the covering where you want the fan to be located. Make the hole a bit larger than the electrical outlet box that you must install.

With a saw, notch the framing member the width and depth of the box so the bottom of the box will be flush with the surface of the ceiling. Or, mount it on the side of the framing member so the bottom is almost flush with the bottom of the ceiling material.

Power wires (12/2 with ground) are “fished” between the joists or above them, if there is a crawl space above the ceiling. The power may be tapped from an existing circuit (turn off the power before working), or you can run a brand new circuit from the main electrical panel. Have a professional electrician make this connection. Since a ceiling fan doesn’t require special electrical power, try to tie-in to the power on an existing circuit.

Ceiling Fan Installation – Pitched Ceiling
PITCHED CEILING OR BEAM-If the ceiling is slightly pitched or the fan will hang from a beam, it is recommended that you use either a swivel hanger or angle kit. These hangers permit the fan to hang level. The fan can be supported by a hook. You’ll need a block of wood to support the hook and fan. Use a short length of 4×4. Pre-drill it and bolt it to the beam. The power wire can be staple-nailed along the top or bottom edge of a beam and then routed into the electrical ceiling box. You can paint or stain the cable so it matches the beam and doesn’t show.

Mount the bracket and put the blades into the holders. Now fasten the blades to the fan Switch operation from fan. Wiring hookup is for 3-speed pull chain. Wiring provides for optional light kit, which is operated independently of the fan by pull chain switch. Ground is green.

Ceiling Fan Installation – Assembly
GENERAL FAN ASSEMBLY:Most ceiling fans are assembled the same way. There may be slight variations between manufacturers, but the difference will be noted in the instructions in the fan package, if present. Here’s the procedure:

  1. Screw the hanger to a framing member, making sure the hanger and the framing member is securely fastened. The hanger may go “through” a knockout in the electrical box.
  2. It is never connected to the box. Run the downrod through the canopy. Then run the three electrical wires from the fan through the downrod assembly.
  3. Assemble the downrod into the motor stem. e Attach the downrod to the motor stem, insert the bolt provided and insert and spread the cotter pin. Fasten the set screw so it is secure.
  4. Lift the fan into position without the blades attached. Put the vaulted ceiling mount or swivel into the hanger bracket. Now connect the power wires as explained elsewhere in this article.
  5. If the fan has a light kit, remove the switch housing on the fan and the center screw. Screw the light kit onto the bottom plate. Have a helper hold the kit assembly in position while you connect the fan’s blue wire to the light’s black wire and the fan’s white wire to the light’s white wire. Use wire nuts for these splices and wrap them with electrician’s tape (plastic type). Now screw on the bottom plate, light and attach the glass.
  6. Mount the bracket and put the blades into the holders. Now fasten the blades to the fan motor. The unit is assembled.
  7. Connect the fan to power. The white wire goes to white, and black to black. The ground wire connects to the ceiling box via a screw or clip. Or it is spliced to an incoming ground wire. Check to make sure that the fan operates in forward and reverse. If the fan has a light kit, test the lights at this point.

Ceiling Fan Installation – Wiring
Wiring hookup to control light from a wall switch-This connection lets you control the fan with the factory 3-speed control, but with a separate wall switch for an optional light kit.

To control fan with 3-speed transformer and a standard wall switch or supplemental variable control. For variable speed, leave pull chain on the high speed setting.

To control fan and the light from a wall switch. Put the pull chain on high speed, although the chain can be put in any speed without damaging the motor.
ceiling fan installation, easy ceiling fan installation

Print Friendly