If
your washer won't drain, even after cycling the timer, there can
be several causes:
1)
Washer pumps the water out, but the water comes back after
the spin cycle ends
- Check the height of the drain hose. A part of it must be above
the water line of the tub, otherwise some water will remain in the
hose.
2)
Washer doesn't pump the water
- Verify that the water pump motor is receiving power. Check
the wires that lead to the pump motor. They could have vibrated
loose from their connections or burned out. These can be replaced
easily.
- The water pump motor, impeller, or timers could be malfunctioning.
Call in a pro.
3)
Washer spins, but doesn't pump the water
- The drain line is plugged. Usually, it is a small article
of clothing, like a sock that gets lodged into the drain line or
motor itself. Remove back acces panel, disconnect drain line from
water pump motor and check for obstructions.
THANKS>-(
Can you help? Thank you very much! A.