When
no water appears to be getting into your washing machine and your
left looking at a pile of clothes with detergent on them, try these
few tips:
1)
Verify power is getting to the machine. Check for a tripped
circuit breaker.
2)
Verify water is getting to the machine- First, turn off the water
then disconnect the inlet hoses on the back of the washer. Turn
water on slowly and verify that is coming out of the hose. If water
is coming out then check for any obstruction or sediment in the
inlet valves. Clean, if necessary. If there is no water flow, disconnect
the hose and look for obstructions or simply replace it.
3)
If water is getting as far as the inlet hose connections, then
remove the back access panel. Check the inlet hoses to make sure
they are not kinked or damaged in any way.
4)
If water is getting as far as the inlet hoses, then the problem
probably lies in the water valve or water valve solenoid. Time to
call in a pro.
